What is a bending moment



Share this page:

What is Bending Moment?

In this tutorial, we will simply answer the question: What is a bending moment? A bending moment is a force normally measured in a force x length (e.g. kNm). Bending moments occur when a force is applied at a given distance away from a point of reference; causing a bending effect. In the most simple terms, a bending moment is basically a force that causes something to bend. If the object is not well-restrained the bending force will cause the object to rotate about a certain point.

This is often a difficult idea to comprehend, therefore consider an example of a plastic ruler overhanging a desk. If one end of the ruler is lying on the desk and is being held down, and then a force is applied to the other end of the ruler, it will cause the ruler to bend. The ruler will experience the greatest bending moment at the end where the force is applied.

To calculate the bending moment about a reference point, we take the magnitude of the force and multiply it by the distance of the force from the point. Note that the force must be perpendicular to the line between the point where the force is applied and the reference point. Though that sounds confusing, it can be simplified in our example:

In the above example, the bending moment at point A is simply the distance multiplied by the force. Therefore, the Bending Moment at Point A = 0.2(10) = 2 Nm.

It is important to note that to use the above formula, the force (in this case a 10 N downward force) must NOT pass through the point. This is obvious, as if we applied the same formula (distance x force) the distance would equal zero and therefore there would be no bending moment force.